 | Title: Variable Structure Systems: From Principles to Implementation |  | | Editor: Asif Sabanovic, Leonid M. Fridman and Sarah Spurgeon |  | | Reviewer: David Jefferies |  | | Publisher: Institution of Electrical Engineers |  | | ISBN: 0 86341 350 1 |  | | Pages: 409 |  | | Price: £65.00 |
This
control-engineering monograph, which has 31 contributors from around
the globe, came to my attention after I had already used the term
"variable structure system" to describe an adaptive and possibly
evolutionary electronic system that reconfigures itself depending on
its own outputs.
Although the term as used in the narrow sense of this book
seems rather arcane and technical, we are all used to the behaviour of
variable structure control systems, as every few years in the West we
elect a new administration with limited powers to alter the rules under
which we all operate. Therefore, what can be learnt from the
mathematically erudite control engineers about the behaviour of such
classes of system is interesting.
In the domain of real-world control engineering problems, many
(if not most) systems that one seeks to control have the properties of
being non-linear; imperfectly understood or specified; possibly
containing time delays between causes and effects; and potentially
dangerous if the control fails. These factors provide a strong
motivation for the control engineer to develop a general method that
may be algorithmically applied in diverse cases. From reading this
book, I am convinced that such a pot of gold at the end of the rainbow
may be possible.
Some idea of the power of a variable structure control system
may be obtained by considering the escapement mechanism in an
18th-century long case (grandfather) clock. The escapement senses the
displacement of the pendulum from vertical, and at a prescribed
position allows a cogwheel to administer a small kick to the pendulum.
The energy for this comes from the lead weights, moving down over eight
days under gravity. The swing of the damped pendulum is maintained on
what is termed a "limit cycle", at constant amplitude and period. The
periodic movements of the cogwheel are transmitted through the drive
train to move the hands around the clock face.
We can immediately grasp why this is a variable structure
system, with configuration that is changed by a measure of the output
variable of the system (in this case the displacement of the pendulum
from vertical). What is not so obvious is the advantage of this system
over other possible methods of maintaining the swing of the pendulum.
In the case of my family grandfather clock, which was built about 1770,
there have only been three recorded times when the mechanism needed to
be maintained. The pallets of the cogwheel wear, the bearings of the
drive train wear, dust and airborne tar accumulate and alter the
friction, the temperature and humidity cycle between day and night and
summer and winter, and yet no allowance needs to be made by the control
system for these unquantifiable effects. The clock just goes on,
century after century, keeping accurate time, give or take a few
seconds a week.
Occasionally, the cumulative effects of wear and ageing cause
the clock to stop. We may say with some confidence that if we wait long
enough, the clock will certainly eventually stop due to causes other
than that the weights have run down. So the control engineer's best
efforts to build a system that is robust against variations in the
system being controlled may eventually fail, and it is probably
important to know when this may happen.
I have for some years been constructing and studying chaotic
electronic circuits, some of which are variable structure systems in
the wider sense. It is possible to construct a system that chatters
along chaotically for an unpredictable and indefinite time before
falling into a trap, or stable fixed point, allowing the system
behaviour to "die".
Chattering is a common problem in variable structure control
systems, and many pages of this book are devoted to its minimisation.
Chattering is a concomitant side-effect of the advantages of the
method; it is suggestive of the behaviour of the economy under
successive changes in regulatory instruments, such as interest rates
and taxes.
The ability to alter itself as a consequence of its own
behaviour is a property of what is termed a "complex adaptive system",
including biological and ecological models. The advent of powerful
computing resources lets us study such models. The question then arises
as to how well the model translates into a prediction of the behaviour
in the real world. Also suggestive is the idea of man-made evolutionary
systems, such as those studied in electronic hardware by a group at
Sussex University.
The book contains introductory material and a selection of well
worked-out practical applications, including power electronics, neural
networks, motion control, automobile applications and underwater
objects. For anyone seeking a way in to the regulation of non-linear
and uncertain systems, this unique book may provide valuable reading.
David Jefferies is senior lecturer in engineering, Surrey University.
|